Load Equalizer - 2 Watt (pair)

The 2-Watt Load Equalizer (formerly known as Stage I Load Equalizer) may be for you if the following matches your situation after changing your incandescent bulbs to LEDs:

• the blinkers do not blink at all - either they turn on and stay on solid or they don't even come on at all
• the left and right directional signals illuminate at the same time when activated (4-way blink problem)

The 2-Watt Load Equalizer adds 2 Watts of load to the turn signal system, to make the turn signal system with the stock flasher relay operate in the fast blink condition (bulb out) with your LEDs blinkers installed.  If you want to slow your blinkers down to the normal blink rate, you will need to match the wattage of the OEM turn signal lamps you removed, with our Load Equalizers.

For the 4-way blink problem, sometimes one pair of our 2-Watt Load Equalizers is sufficient.  However, some motorcycles require more than one pair (particularly on older bikes) in which case it may make sense to go with one pair of the 10-Watt or 25-Watt Load Equalizers instead.

Our 2-Watt Load Equalizer couldn't be easier to install!  The device is very small and connects to the blinker wires.  Your order will come with detailed instructions and simple tap connectors that do not require any cutting or splicing of the factory wiring!

Our Load Equalizers are over designed and over sized for excellent heat capacity.  They will not get too hot under normal operation.  You wont have any overheating problems with our products!

BEFORE CHOOSING A LOAD EQUALIZER TO CORRECT YOUR BLINKER FLASH RATE, BE SURE TO SEE OUR ELECTRONIC LED FLASHER RELAY WITH PLUG AND PLAY CONVENIENCE!  IT'S THE BETTER AND CHEAPER SOLUTION TO THE PROBLEM!

The Custom LED 2-Watt Load Equalizers come with detailed installation instructions as follows:

Click icon to download.
Adobe Acrobat Reader is required to view this file.
If you are having problems viewing the file, please download the free software here.