{"title":"Electronic LED Flasher Relays","description":"\u003cp\u003eCustom LED currently has five different Electronic LED Flasher Relays for motorcycles, which are designed to blink at the normal blink rate - regardless of what type of blinker lamps are installed on your motorcycle.\u003c\/p\u003e\n\u003cp\u003eWith \u003cem\u003enearly\u003c\/em\u003e a zero minimum load requirement of 0.05A, and an extremely short time to first-blink, these LED flasher relays will operate properly under conditions that the the OEM flasher relay will blink fast, or will not blink at all. Read more about each product on the respective product pages.\u003c\/p\u003e\n\u003cp\u003eTo determine compatibility with your motorcycle, view the \"Compatibility List\" on the individual flasher relay product pages.\u003c\/p\u003e","products":[{"product_id":"elfr-1-electronic-led-flasher-relay","title":"ELFR-1 Electronic LED Flasher Relay with OEM Connector","description":"\u003cul\u003e\n\u003cli\u003eMaintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers.\u003c\/li\u003e\n\u003cli\u003ePlug and play connectivity with OEM connector for 2-wire \u003cstrong\u003eAND\u003c\/strong\u003e 3-wire OEM Flasher Relay Connectors (see compatibility list).\u003c\/li\u003e\n\u003cli\u003eRecommended accessory for all Custom LED Integrated LED Tail Lights.\u003c\/li\u003e\n\u003cli\u003eNear zero initial turn-on delay (other LED relays delay when signals are first engaged).\u003c\/li\u003e\n\u003cli\u003e1-year \u003ca title=\"Custom LED's Warranty Policy\" href=\"\/pages\/custom-led-policies\"\u003eWarranty\u003c\/a\u003e \u0026amp; \u003ca title=\"Custom LED's Satisfaction Guarantee\" href=\"\/pages\/custom-led-policies\"\u003eSatisfaction Guarantee\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eShips same business day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"responsive-tabs\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNow you can finally fix the flash rate on your motorcycle with our unique Plug And Play solution\u003c\/strong\u003e!  That's right, our Electronic LED Flasher relay directly replaces the stock flasher relay on most Yamaha, Honda and Kawasaki motorcycles by plugging directly into the harness in place of the OEM flasher relay! \u003c\/p\u003e\n\u003cp\u003eWhether your OEM relay has 2-wires or 3-wires, our flasher relay is a direct replacement for compatible motorcycles, as the 3rd wire is simply a ground connection which our relay does not require.  See the compatibility list below for bikes that are known to be Plug-and-Play compatible with our ELFR-1.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor other motorcycles not on this compatibility list, please click \u003c\/span\u003e\u003ca href=\"\/collections\/electronic-led-flasher-relays\" title=\"Motorcycle LED Flasher Relays\"\u003ehere\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFor motorcycles with nonstandard two wire flasher relays (not on compatibility list), this flasher relay can still be used by removing the connector and hard-wiring it.  Even three wire flasher relays can be replaced if one of the wires is a ground wire.  We also have a new connector option on our \u003ca href=\"\/products\/elfr-1-qd-electronic-led-flasher-relay\" title=\"LED Flasher Relay with Quick Disconnects\"\u003eELFR-1 QD\u003c\/a\u003e model, which may be more useful for hard-wire and custom applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis unit is guaranteed to replace any two-wire flasher relay and operate at the normal DOT blink rate for motorcycles with stock blinkers, LED blinkers, or any combination of both\u003c\/strong\u003e, provided the total load on the system is within 0.05A to 10A (0.6 Watts to 120 Watts!) - which basically covers the majority of  blinker products on the market!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the Installation Tab for more important details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e \u003cstrong\u003eYour motorcycle must have a rectified standard 12VDC system for this flasher relay to work (most bikes are 12VDC).\u003c\/strong\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum Rated Current: 0.05A\u003c\/li\u003e\n\u003cli\u003eMaximum Rated Current: 10A\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 12VDC\u003c\/li\u003e\n\u003cli\u003eFlash Rate: Constant\u003c\/li\u003e\n\u003cli\u003eSize: 1.2\" x 1.77\" x 0.74\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCompatibility List\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-1 FLASHER RELAY PLUG-AND-PLAY COMPATIBILITY LIST:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cem\u003eNOTE: USA SPEC SHOWN, FOR NON-US SPEC VERIFY INDIVIDUALLY\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis list will determine if your motorcycle harness is known to be Plug-And-Play with our ELFR-1 Flasher Relay!\u003c\/strong\u003e  \u003cspan\u003eIf your bike is not on the list, it may or may not be plug-and-play.  Please visually compare the flasher relay connector on your motorcycle to confirm before ordering.  The compatibility list is arranged by engine displacement.  If there is no year designation for your bike, that means it fits all years.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"gt-accordion\"\u003e\n\u003ch4\u003eHonda:\u003c\/h4\u003e\n\u003cdiv\u003eNavi (NVA110B), Super Cub C125A, Z125M\/A (Monkey), CT125A, ADV150A, PCX150\/A, WW150\/A, NSS250, PS250, VTR250, CRF250, 20+ CMX300\/A, 19-20 CB300R\/RA, CRF300, CMX450, CRF450L\/RL, 20+ CMX500\/A, 16-23 CB500F\/FA, 16-23 CB500X\/XA, 19-23 CBR500R\/RA, CB600F, 599 Hornet, 07-current CBR-600RR, CBR600F, CBR600F2, CBR600F3, CBR600F4, CBR600F4i, Shadow VLX (VT600C), NT650, 83-85 CB650SC, CBR650R\/RA, CB700SC, 84-87 Magna (VF700), 91-03 CB750, 84-87 Shadow (VT700), 82-84 \u0026amp; 94-03 Magna (VF750), Shadow 750 (VT750), VFR750F, NC750XA\/XD, VFR800, CB900F, 919 Hornet, CBR900RR, CBR929RR, RC-51, 11-16 CB1000R, 18-19 CB1000RA, 04-16 CBR-1000RR, CBR1000F, RVT1000R, Shadow 1100 (VT1100), VTR1000F, VTR1000R, CRF1000, CBR1100XX, ST1100, 21-24 CMX 1100, VF1000R, VF1100C, 83 GL1100, 84-87 GL1200, ST1300, VT1300, VTX1300, 08-22 Concours 14, 97-03 GL1500C (Valkyrie), 02-04 VTX1800, (and more!)\u003c\/div\u003e\n\u003ch4\u003eHusqvarna\u003c\/h4\u003e\n\u003cdiv\u003e2017+ FE 250, 2017+ FE 350, Svartpilen 401, Vitpilen 401, 2017+ FE 450, FE 350S, 2017+ FE 501, FE 501S, 701 Enduro, 701 Supermoto, Vitpilen 701\u003cbr\u003e\u003csmall\u003e\u003cstrong\u003eNOTE: ELFR-1 locking tab must be removed to be plug-and-play compatible.  The OEM connector is a 2-position, whereas ours is 3-position connector with only 2-pins populated.  The pins will align, but the tab is mis-aligned thus requiring removal.\u003c\/strong\u003e\u003c\/small\u003e\n\u003c\/div\u003e\n\u003ch4\u003eKawasaki:\u003c\/h4\u003e\n\u003cdiv\u003eKLX250S\/SF, 96-07 Ninja 250R, Versys-X 300, CBF300N\/NA, Ninja 500R, 96-09 Vulcan 500, ER-6N, ZZR600, 05-06 ZX-636, 95-08 ZX-6R(R), 2013+ ZX-6R, 2007+ Versys 650, Z650, 2015+ Vulcan S 650, 08-18 KLR650, W650 (EJ650), Ninja 650R, Ninja 650, ZR-7, 96-03 ZX-7R, 05-06 Z750S, Z800, 95-05 Vulcan 800, W800 Cafe, Z900 (RS\/RS Cafe\/RS SE), 2006+ Vulcan 900, ZX-9R, ZX-10R, 03-06 \u0026amp; 14-16 Z1000, Versys 1000, 2011+ Ninja 1000, ZX-11, ZXR1200R (1100), ZX-12R, ZX-14, ZZR1200, ZX1200, 96-99 Vulcan 1500, Vulcan S, (and more!)\u003c\/div\u003e\n\u003ch4\u003eKTM:\u003c\/h4\u003e\n\u003cdiv\u003e(most models!) 125, 250, 350, 380, 400, 450, 500, 525, 530, 540, 620, 625, 640, 690, 950, 990, (and more!)\u003c\/div\u003e\n\u003ch4\u003eKymco:\u003c\/h4\u003e\n\u003cdiv\u003eXCiting 250, XCiting 500, (and more!)\u003c\/div\u003e\n\u003ch4\u003eSuzuki:\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e*Note: For all Suzuki applications, modification to the locking tab on the ELFR-1 may be necessary.\u003c\/p\u003e\n89-00 GS500E, 88-97 Katana (GSX600F), 94-96 RF600R, 96-99 Bandit (GSF600S), 96-13 DR650SE, 96-04 Savage (LS650P), 89-97 Katana (GSX750F), 93-95 GSX-R750W, 90-93 VX800, 92-97 Intruder (VS800GL), 94-97 RF900R, 93-98 GSX-R1100W, 97-00 Bandit (GSF1200S), 87-03 (VS1400GLP), (and more!)\u003c\/div\u003e\n\u003ch4\u003eTriumph:\u003c\/h4\u003e\n\u003cdiv\u003eDaytona, Bonneville, Scrambler (most), Street Triple (most), Tiger 800, Tiger 800XC, Tiger 1050, Tiger 1050 SE, Thruxton, (and more!)\u003c\/div\u003e\n\u003ch4\u003eYamaha:\u003c\/h4\u003e\n\u003cdiv\u003eSMAX, TW200 Trailway, Morphous 250, V-Star 250, Virago 250, XV250, WR250, XT250, XMAX, YZF-R3, Majesty 400, SR400, 99-16 YZF-R6, YZF600, FZ-6, FZ-6R, Seca II XJ600S, XSR700, YZF750, YZFR7, FZ-07, MT-07, Tenere 700, FZ-8, TDM850, FZ-09, MT-09, FJ-09, XSR900, SR950, Bolt C Spec, YZF1000, 98-14 YZF-R1, FZR-1000, FZ-1, FZS1, GTS1000, 92-93 FJ1200, 03-12 FJR1300, MT-01, Super Tenere, 2009+ VMAX, Royal Star, (and more!)\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eFor other motorcycles not on this compatibility list, please click \u003ca href=\"\/collections\/electronic-led-flasher-relays\" title=\"Motorcycle LED Flasher Relays\"\u003ehere\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eGeneral Compatibility Note:\u003c\/span\u003e\u003c\/strong\u003e  \u003cstrong\u003eAlthough we try to keep this Plug-And-Play list current and complete, there are many more bikes out there that are Plug-and-Play compatible\u003c\/strong\u003e, and hard wire compatible with our LED Flasher Relay.  We can not list them all!  If your motorcycle has a two wire flasher relay, our relay will work for certain but may need to be hard wired into the harness.  For three wire flasher relays, if one of the three wires is merely a ground wire, our relay will work but may need to be hard wired into the harness.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-1 HARD WIRE INSTALLATION INSTRUCTIONS:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e You may lose your self-canceling feature by replacing the flasher relay if your bike is equipped from the factory with self-canceling turn signals.  If you want to keep this feature, use our \u003ca title=\"Universal Motorcycle Stage II Load Equalizer for Blinkers| Custom LED\" href=\"\/products\/stage-ii-load-equalizer\"\u003eStage II Load Equalizers\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eAll Applications:\u003c\/h4\u003e\n\u003cp\u003eIf your existing flasher relay is a two wire flasher relay (or a three wire with a ground wire), and you have access to it, you can replace it with our flasher relay.\u003c\/p\u003e\n\u003cp\u003eIdentify and connect the wires leading to the OEM flasher relay as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed wire on ELFR-1 to power source (ignition switched +12v)\u003c\/li\u003e\n\u003cli\u003eBlack wire on ELFR-1 to load (blinker lamps\/ blinker switch)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDucati:\u003c\/h4\u003e\n\u003cp\u003e996 - hard wire installation as follows when replacing OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle Light Blue (LB) gets connected to the ELFR-1 Red wire\u003c\/li\u003e\n\u003cli\u003eMotorcycle Pink (P) gets connected to the ELFR-1 Black wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHonda:\u003c\/h4\u003e\n\u003cp\u003e2014 Grom hard wire installation as follows when replacing the OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Black to ELFR-1 Red wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Gray to ELFR-1 Black wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.5;\"\u003eUse optional male \"quick disconnects,\" or available from Custom LED as P\/N: \u003c\/span\u003e\u003ca style=\"line-height: 1.5;\" title=\"ELFR-1 QD Electronic LED Flasher Relay with Quick Disconnects | Custom LED\" href=\"\/products\/elfr-1-qd-electronic-led-flasher-relay\"\u003eELFR-1 QD\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e2003-2006 CBR 600RR hard wire installation as follows when replacing the OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle White\/Green stripe to ELFR-1 Red wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Gray to ELFR-1 Black wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.5;\"\u003eRead informative \u003c\/span\u003e\u003ca style=\"line-height: 1.5;\" title=\"How to replace the Flasher Relay on 2003-2006 Honda CBR-600RR\" href=\"\/blogs\/custom-led-product-information\/12610269-cbr-600rr-flasher-relay-replacement-for-led-years-2003-2004-2005-2006\"\u003eCBR-600RR ELFR-1 installation article\u003c\/a\u003e\u003cspan style=\"line-height: 1.5;\"\u003e with video in our Blog\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003eCBR 125\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Brown wire to ELFR-1 Red wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Blue wire to ELFR-1 Black wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.5;\"\u003eUse optional male \"quick disconnects,\" or available from Custom LED as P\/N: \u003c\/span\u003e\u003ca style=\"line-height: 1.5;\" title=\"ELFR-1 QD Electronic LED Flasher Relay with Quick Disconnects | Custom LED\" href=\"https:\/\/customled.myshopify.com\/products\/elfr-1-qd-electronic-led-flasher-relay\"\u003eELFR-1 QD\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.5;\"\u003eSee picture of installation \u003c\/span\u003e\u003ca style=\"line-height: 1.5;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/CBR125-Flasher-Relay.jpg?101\"\u003ehere\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKawasaki:\u003c\/h4\u003e\n\u003cp\u003e08-11 Ninja 250R hard wire installation as follows when replacing the OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle Orange\/Green stripe wire to the ELFR-1 Red wire\u003c\/li\u003e\n\u003cli\u003eMotorcycle Orange wire to the ELFR-1 Black wire\u003c\/li\u003e\n\u003cli\u003eUse optional male \"quick disconnects,\" or available from Custom LED as P\/N: \u003ca title=\"ELFR-1 QD Electronic LED Flasher Relay with Quick Disconnects | Custom LED\" href=\"\/products\/elfr-1-qd-electronic-led-flasher-relay\"\u003eELFR-1 QD\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eYamaha:\u003c\/h4\u003e\n\u003cp\u003eRoadstar line (some models, \u0026lt; 2015), Raider, Warrior Stryker, V-Star - hard wire installation as follows when replacing OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle Brown wire to ELFR-1 Red wire\u003c\/li\u003e\n\u003cli\u003eMotorcycle Brown\/white stripe wire to ELFR-1 Black wire\u003c\/li\u003e\n\u003cli\u003eview picture \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/Flasher-Relay-Roadstar.jpg?99\"\u003ehere\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse optional male \"quick disconnects\" as available from Custom LED as P\/N: \u003ca title=\"ELFR-1-QD Electronic LED Flasher Relay with Quick Disconnects\" href=\"\/products\/elfr-1-qd-electronic-led-flasher-relay\"\u003eELFR-1-QD\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eIf you find that your motorcycles flasher relay is not two-wire and\/or replaceable, you may use the \u003ca title=\"Universal Motorcycle Load Equalizer for LED Blinkers and Turn Signals\" href=\"\/collections\/universal-led-load-equalizers\"\u003eCustom LED Universal Load Equalizers\u003c\/a\u003e along with your stock flasher relay instead.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eVideo\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eWe have a large collection of all Custom LED product videos on the \u003ca title=\"Custom LED's YouTube Channel with Product Reviews, Features, and more!\" href=\"https:\/\/www.youtube.com\/CustomLED\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eCustom LED YouTube Channel\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe videos in this playlist below are a collection of user-submitted and original videos related to our \u003ca href=\"https:\/\/www.customled.com\/collections\/electronic-led-flasher-relays\"\u003eLED Flasher Relays\u003c\/a\u003e.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/videoseries?list=PLrOpZb7iY08QeyQHXLRYiU-ENK0BI2xBV\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Custom LED ELFR-1 Plug-And-Play Electronic LED Flasher Relay comes with detailed installation instructions.\u003c\/p\u003e\n\u003cp\u003eInstallation of this product requires that you identify and replace the OEM flasher relay on the motorcycle.  If you are unfamiliar with the location of your OEM flasher relay, or electronics in general, please consult a qualified technician or your repair manual for additional information.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of the ELFR-1 is as follows:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca title=\"Custom LED ELFR-1 Electronic LED Flasher Relay Installation Instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/INSTRUCTION_SHEET_WEB.pdf?v=1615492393\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/reader_icon_special_8da8acb3-d5e5-4a69-b7cf-0d5fcde0f01b_small.jpg?2331\" alt=\"Installation Instructions\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center; color: #999999; line-height: 1.5; font-size: small;\"\u003eClick icon to download. \u003cbr\u003eAdobe Acrobat Reader is required to view this file.\u003cbr\u003eIf you are having problems viewing the file, please download the free software \u003ca title=\"Download Adobe Reader\" href=\"https:\/\/get.adobe.com\/reader\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003csmall\u003eNOTE:\u003c\/small\u003e\u003c\/strong\u003e\u003csmall\u003e In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems.  These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps.  Problems such as, but not limited to: the \u003ca href=\"https:\/\/www.customled.com\/blogs\/custom-led-product-information\/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals\"\u003e4-way blink problem\u003c\/a\u003e (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in \"blinker mode\" due to non-zero blinker voltages.  Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle.  \u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eRemember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\u003cdiv\u003eproducts-recommended\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Custom LED","offers":[{"title":"Default Title","offer_id":569285629,"sku":"ELFR-1","price":22.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/products\/ELFR-1-LED-Relay-1.jpg?v=1558405919"},{"product_id":"elfr-1-qd-electronic-led-flasher-relay","title":"ELFR-1-QD Electronic LED Flasher Relay with Quick Disconnects","description":"\u003cul\u003e\n\u003cli\u003eMaintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers.\u003c\/li\u003e\n\u003cli\u003ePlug and play connectivity with OEM connector (see compatibility list and\/or check OEM flasher relay connector first).\u003c\/li\u003e\n\u003cli\u003eRecommended accessory for all Custom LED Integrated LED Tail Lights.\u003c\/li\u003e\n\u003cli\u003eNear zero initial turn-on delay (other LED relays delay when signals are first engaged).\u003c\/li\u003e\n\u003cli\u003e1-Year \u003ca href=\"\/pages\/custom-led-frequently-asked-questions\" title=\"Custom LED's Frequently Asked Questions and Policies\"\u003eWarranty\u003c\/a\u003e \u0026amp; \u003ca href=\"\/pages\/custom-led-frequently-asked-questions\" title=\"Custom LED's Frequently Asked Questions and Policies\"\u003eSatisfaction Guarantee\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eShips same business day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"responsive-tabs\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe ELFR-1-QD is the same part as our \u003ca href=\"\/products\/elfr-1-electronic-led-flasher-relay\" title=\"ELFR-1 LED Flasher Relay\"\u003eELFR-1 LED flasher relay\u003c\/a\u003e, however it has the quick-disconnect connectors installed on the wires as shown in the image.  This connector will fit some OEM flasher relay sockets.  Check the compatibility list for bikes that are known to have compatible OEM flasher relay sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor other motorcycles not on this compatibility list, please click \u003c\/span\u003e\u003ca title=\"Motorcycle LED Flasher Relays\" href=\"https:\/\/www.customled.com\/collections\/electronic-led-flasher-relays\"\u003ehere\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease read all of the product information in the Overview on our \u003ca href=\"\/products\/elfr-1-electronic-led-flasher-relay\" title=\"ELFR-1 Electronic LED Flasher Relay\"\u003eELFR-1 page\u003c\/a\u003e, for more information about this product.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum Rated Current: 0.05A\u003c\/li\u003e\n\u003cli\u003eMaximum Rated Current: 10A\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 12VDC\u003c\/li\u003e\n\u003cli\u003eFlash Rate: Constant\u003c\/li\u003e\n\u003cli\u003eSize: 1.2\" x 1.77\" x 0.74\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCompatibility List\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-1-QD FLASHER RELAY COMPATIBILITY LIST:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cem\u003eNOTE: USA SPEC SHOWN, FOR NON-US SPEC VERIFY INDIVIDUALLY\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis list will determine if your motorcycle harness is known to have a relay socket that is compatible with the quick-disconnects on our ELFR-1-QD Flasher Relay!\u003c\/strong\u003e  If your bike is not on this list, please check the connector on your OEM flasher relay before ordering this part.  Our standard \u003ca href=\"\/products\/elfr-1-electronic-led-flasher-relay\"\u003eELFR-1\u003c\/a\u003e unit is plug-and-play compatible with many motorcycles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e If there are no specific connection instructions below for your motorcycle, you must follow the \"All Applications\" hard-wire installation instructions to identify the wires in your motorcycle relay socket with a test-light or volt meter before installing this product.  Improperly installing the ELFR-1 will destroy it.\u003c\/p\u003e\n\u003cdiv class=\"gt-accordion\"\u003e\n\u003ch4\u003eAll Applications:\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eIf your existing flasher relay is a two wire flasher relay (or a three wire with a ground wire), and you have access to it, you can replace it with our flasher relay.\u003c\/p\u003e\n\u003cp\u003eIdentify and connect the wires leading to the OEM flasher relay as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed wire on ELFR-1-QD to power source (ignition switched +12v)\u003c\/li\u003e\n\u003cli\u003eBlack wire on ELFR-1-QD to load (blinker lamps\/ blinker switch)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch4\u003eBMW:\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e00-03 F650GS\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eDucati:\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e996 - hard wire installation as follows when replacing OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle Light Blue (LB) gets connected to the ELFR-1-QD Red wire\u003c\/li\u003e\n\u003cli\u003eMotorcycle Pink (P) gets connected to the ELFR-1-QD Black wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch4\u003eHonda:\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e2014+ Grom hard wire installation as follows when replacing the OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Black to ELFR-1-QD Red wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Gray to ELFR-1-QD Black wire\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e2003-2006 CBR 600RR hard wire installation as follows when replacing the OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle White\/Green stripe to ELFR-1-QD Red wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Gray to ELFR-1-QD Black wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.5;\"\u003eRead informative \u003c\/span\u003e\u003ca href=\"\/blogs\/custom-led-product-information\/12610269-cbr-600rr-flasher-relay-replacement-for-led-years-2003-2004-2005-2006\" title=\"How to replace the Flasher Relay on 2003-2006 Honda CBR-600RR\" style=\"line-height: 1.5;\"\u003eCBR-600RR ELFR-1-QD installation article\u003c\/a\u003e\u003cspan style=\"line-height: 1.5;\"\u003e with video in our Blog\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003eCBR 125\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Brown wire to ELFR-1-QD Red wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Blue wire to ELFR-1-QD Black wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.5;\"\u003eSee picture of installation \u003c\/span\u003e\u003ca style=\"line-height: 1.5;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/CBR125-Flasher-Relay.jpg?101\"\u003ehere\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch4\u003eKawasaki:\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e08-11 Ninja 250R hard wire installation as follows when replacing the OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle Orange\/Green stripe wire to the ELFR-1-QD Red wire\u003c\/li\u003e\n\u003cli\u003eMotorcycle Orange wire to the ELFR-1-QD Black wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e00-23 Vulcan (all models with OEM 5-pin self-canceling flasher relay.  OEM P\/N: 27002-1113. See picture \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/OEM_Flasher_Relay.jpg?v=1711025088\"\u003ehere\u003c\/a\u003e.)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle Orange\/Black stripe wire to ELFR-1-QD Red wire\u003c\/li\u003e\n\u003cli\u003eMotorcycle Orange wire to ELFR-1-QD Black wire\u003c\/li\u003e\n\u003cli\u003eSee installation picture \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/Replacement_Flasher_Relay_Connected.jpg?v=1711025103\"\u003ehere\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch4\u003eSuzuki:\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e2017+ SV650, 2017+ V-Strom 650, 2014+ V-Strom 1000, GSX-S1000, and more!\u003c\/p\u003e\n\u003cp\u003eCheck out our NEW Plug-And-Play \u003ca href=\"https:\/\/www.customled.com\/products\/elfr-1-u-electronic-led-flasher-relay-7-pin-suzuki\"\u003eELFR-1-U\u003c\/a\u003e for Suzuki Motorcycles!\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch4\u003eYamaha:\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eLED Replacement Flasher Relay for Yamaha OEM Parts: 1D7-83350-00-00, 1D7-83350-01-00, 3D8-83350-00-00, 4NK-83350-00-00, 5S7-83350-00-00, \u003cspan data-mce-fragment=\"1\"\u003e4WM-83350-00-00, 2UJ-83350-01-00, 3GM-83350-01-0\u003cwbr data-mce-fragment=\"1\"\u003e0, 3GM-83350-02-0\u003cwbr data-mce-fragment=\"1\"\u003e0, 5EL-83350-00-00, 5EL-83350-01-00.\u003c\/wbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBolt and Bolt R-Spec, VMAX (some models \u0026lt; 2009), V-Star, Royal Star, Roadstar Line (some models \u0026lt; 2015 including: Raider, Warrior, Stryker, Stratoliner, Roadliner, etc.)\u003c\/p\u003e\n\u003cp\u003eHard Wire installation is as follows when replacing the OEM flasher relay with our ELFR-1-QD Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle Brown wire to ELFR-1-QD Red wire\u003c\/li\u003e\n\u003cli\u003eMotorcycle Brown\/white stripe wire to ELFR-1-QD Black wire\u003c\/li\u003e\n\u003cli\u003eView picture \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/Flasher-Relay-Roadstar.jpg?99\"\u003ehere\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong style=\"line-height: 1.5;\"\u003eIf you find that your motorcycles flasher relay is not two-wire and\/or replaceable, you may use the \u003ca href=\"https:\/\/customled.myshopify.com\/collections\/universal-led-load-equalizers\" title=\"Universal Motorcycle Load Equalizer for LED Blinkers and Turn Signals\"\u003eCustom LED Universal Load Equalizers\u003c\/a\u003e along with your stock flasher relay instead.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eVideo\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eWe have a large collection of all Custom LED product videos on the \u003ca href=\"https:\/\/www.youtube.com\/CustomLED\" title=\"Custom LED's YouTube Channel with Product Reviews, Features, and more!\" target=\"_blank\"\u003eCustom LED YouTube Channel\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe videos in this playlist below are a collection of user-submitted and original videos related to our \u003ca href=\"https:\/\/www.customled.com\/collections\/electronic-led-flasher-relays\"\u003eLED Flasher Relays\u003c\/a\u003e.\u003c\/p\u003e\n\u003ciframe src=\"\/\/www.youtube.com\/embed\/videoseries?list=PLrOpZb7iY08QeyQHXLRYiU-ENK0BI2xBV\u0026amp;rel=0\" height=\"315\" width=\"560\" allowfullscreen=\"allowfullscreen\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp\u003eThe Custom LED ELFR-1-QD Electronic LED Flasher Relay comes with detailed installation instructions.\u003c\/p\u003e\n\u003cp\u003eInstallation of this product requires that you identify and remove the OEM flasher relay motorcycle.  If you are unfamiliar with the location of your OEM flasher relay, or electronics in general, please consult a qualified technician or your repair manual for additional information.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of the ELFR-1-QD is as follows:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/INSTRUCTION_SHEET_WEB.pdf?v=1615492393\" title=\"Custom LED ELFR-1-QD Electronic LED Flasher Relay Installation Instructions\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/reader_icon_special_8da8acb3-d5e5-4a69-b7cf-0d5fcde0f01b_small.jpg?2331\" alt=\"Installation Instructions ELFR-1-QD Electronic LED Flasher Relay\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"color: #999999; line-height: 1.5; text-align: center; font-size: small;\"\u003eClick icon to download. \u003cbr\u003eAdobe Acrobat Reader is required to view this file.\u003cbr\u003eIf you are having problems viewing the file, please download the free software \u003ca href=\"https:\/\/get.adobe.com\/reader\/\" title=\"Download Adobe Reader\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003csmall\u003eNOTE:\u003c\/small\u003e\u003c\/strong\u003e\u003csmall\u003e In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems.  These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps.  Problems such as, but not limited to: the \u003ca href=\"https:\/\/www.customled.com\/blogs\/custom-led-product-information\/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals\"\u003e4-way blink problem\u003c\/a\u003e (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in \"blinker mode\" due to non-zero blinker voltages.  Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eRemember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\u003cdiv\u003eproducts-recommended\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Custom LED","offers":[{"title":"Default Title","offer_id":569285641,"sku":"ELFR-1-QD","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/products\/ELFR-1_QD-MAX.jpeg?v=1492797828"},{"product_id":"elfr-p-led-flasher-relay","title":"ELFR-P Programmable Electronic LED Flasher Relay with OEM Connector","description":"\u003cul\u003e\n\u003cli\u003eFeatures 10 user selectable blinker flash patterns ranging from DOT to intense strobe modulations.\u003c\/li\u003e\n\u003cli\u003eMaintains programmed blinker flash rate for a wide range of LED and non-LED blinkers.\u003c\/li\u003e\n\u003cli\u003ePlug and play connectivity with OEM connector (see compatibility list).\u003c\/li\u003e\n\u003cli\u003eRecommended accessory for all Custom LED Integrated LED Tail Lights.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e1-year \u003ca title=\"Custom LED's Warranty Policy\" href=\"\/pages\/custom-led-policies\"\u003eWarranty\u003c\/a\u003e \u0026amp; \u003ca title=\"Custom LED's Satisfaction Guarantee\" href=\"\/pages\/custom-led-policies\"\u003eSatisfaction Guarantee\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eShips same business day!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"responsive-tabs\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003eCustom LED ELFR-P Programmable Electronic Flasher Relay\u003c\/strong\u003e! This micro controller based, plug and play flasher relay has 10 preprogrammed user selectable flash patterns!  The flash pattern is easily selected by a 10 position rotary switch conveniently located on the compact unit.\u003c\/p\u003e\n\u003cp\u003eThis flasher relay system will operate properly and consistently for blinker loads ranging from 0.1A to 5A, which basically covers any combination of any blinker products on the market!\u003c\/p\u003e\n\u003cp\u003eThe fuse protected 18\" long harness allows for plug and play* operation for motorcycles listed in our compatibility list below.  For motorcycles not on the list, the unit may be hard wired to any motorcycle with a two wire flasher relay, or three wire flasher relay system where the third wire is a ground.  The extra long harness length, and compact overall size (2.36\" X 1.68\" X .67\") allows for convenient mounting of the flasher relay, for easy access during flash pattern selection.\u003c\/p\u003e\n\u003cp\u003e* in addition to the direct plug and play connector, a single ground wire with affixed loop connector must be connected to a common ground point - such as the frame or battery negative terminal.\u003c\/p\u003e\n\u003cp\u003eEach flash pattern was optimized for effectiveness when used with ANY type of blinker indicators such as: LED blinkers, stock blinkers, incandescent blinkers or integrated LED tail lights!  There are several different flash patterns ranging from DOT (stock) blink patterns to super intense strobing patterns to slow fading patterns.  You can be sure to find a pattern that suits your taste!\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Please read the important notes in the Installation Tab.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e \u003cstrong\u003eYour motorcycle must have a rectified standard 12VDC system for this flasher relay to work (most bikes are 12VDC).\u003c\/strong\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum Rated Current: 0.05A\u003c\/li\u003e\n\u003cli\u003eMaximum Rated Current: 10A\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 12VDC\u003c\/li\u003e\n\u003cli\u003eFlash Rate: Constant\u003c\/li\u003e\n\u003cli\u003eSize: 2.36\" X 1.68\" X .67\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCompatibility List\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-P FLASHER RELAY PLUG-AND-PLAY COMPATIBILITY LIST:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cem\u003eNOTE: USA SPEC SHOWN, FOR NON-US SPEC VERIFY INDIVIDUALLY\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis list will determine if your motorcycle harness is known to be Plug-And-Play with our ELFR-P Flasher Relay!\u003c\/strong\u003e  \u003cspan\u003eIf your bike is not on the list, it may or may not be plug-and-play.  Please visually compare the flasher relay connector on your motorcycle to confirm before ordering.  The compatibility list is arranged by engine displacement.  If there is no year designation for your bike, that means it fits all years.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"gt-accordion\"\u003e\n\u003ch4\u003eHonda:\u003c\/h4\u003e\n\u003cdiv\u003e\u003cspan\u003eNavi (NVA110B), Super Cub C125A, Z125M\/A (Monkey), CT125A, ADV150A, PCX150\/A, WW150\/A, NSS250, PS250, VTR250, CRF250, 20-21 CMX300\/A, 19-20 CB300R\/RA, CRF300, CMX450, CRF450L\/RL, 20-21 CMX500\/A, 19-21 CB500F\/FA, 19-21 CB500X\/XA, 19-21 CBR500R\/RA, CB600F, 599 Hornet, 07-current CBR-600RR, CBR600F, CBR600F2, CBR600F3, CBR600F4, CBR600F4i, Shadow VLX (VT600C), NT650, 83-85 CB650SC, 19-21 CBR650R\/RA, CB700SC, 84-87 Magna (VF700), 91-03 CB750, 84-87 Shadow (VT700), 82-84 \u0026amp; 94-03 Magna (VF750), Shadow 750 (VT750), VFR750F, 21-22 NC750XA\/XD, VFR800, CB900F, 919 Hornet, CBR900RR, CBR929RR, RC-51, 11-16 CB1000R, 18-19 CB1000RA, 04-16 CBR-1000RR, CBR1000F, RVT1000R, Shadow 1100 (VT1100), VTR1000F, VTR1000R, CRF1000, CBR1100XX, ST1100, CMX 1100, VF1000R, VF1100C, 83 GL1100, 84-87 GL1200, ST1300, VT1300, VTX1300, 97-03 GL1500C (Valkyrie), 02-04 VTX1800, (and more!)\u003c\/span\u003e\u003c\/div\u003e\n\u003ch4\u003eKawasaki:\u003c\/h4\u003e\n\u003cdiv\u003e\u003cspan\u003eKLX250S\/SF, 96-07 Ninja 250R, Versys-X 300, Ninja 500R, 96-09 Vulcan 500, ER-6N, ZZR600, 05-06 ZX-636, 95-08 ZX-6R(R), 2013+ ZX-6R, 2007+ Versys 650, Z650, 2015+ Vulcan S 650, 08-18 KLR650, W650 (EJ650), Ninja 650R, Ninja 650, ZR-7, 96-03 ZX-7R, 05-06 Z750S, Z800, 95-05 Vulcan 800, W800 Cafe, Z900 (RS\/RS Cafe\/RS SE), 2006+ Vulcan 900, ZX-9R, ZX-10R, 03-06 \u0026amp; 14-16 Z-1000, 15-17 Versys 1000, 2011+ Ninja 1000, ZX-11, ZXR1200R (1100), ZX-12R, ZX-14, ZZR1200, ZX1200, 96-99 Vulcan 1500, Vulcan S, (and more!)\u003c\/span\u003e\u003c\/div\u003e\n\u003ch4\u003eKTM:\u003c\/h4\u003e\n\u003cdiv\u003e(most models!) 125, 250, 350, 380, 400, 450, 500, 525, 530, 540, 620, 625, 640, 690, 950, 990, (and more!)\u003c\/div\u003e\n\u003ch4\u003eKymco:\u003c\/h4\u003e\n\u003cdiv\u003eXCiting 250, XCiting 500, (and more!)\u003c\/div\u003e\n\u003ch4\u003eSuzuki:\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e*Note: For all Suzuki applications, modification to the locking tab on the ELFR-1 may be necessary.\u003c\/p\u003e\n89-00 GS500E, 88-97 Katana (GSX600F), 94-96 RF600R, 96-99 Bandit (GSF600S), 96-13 DR650SE, 96-04 Savage (LS650P), 89-97 Katana (GSX750F), 93-95 GSX-R750W, 90-93 VX800, 92-97 Intruder (VS800GL), 94-97 RF900R, 93-98 GSX-R1100W, 97-00 Bandit (GSF1200S), 87-03 (VS1400GLP), (and more!)\u003c\/div\u003e\n\u003ch4\u003eTriumph:\u003c\/h4\u003e\n\u003cdiv\u003e06- 08 Triumph Daytona 675, (and more!)\u003c\/div\u003e\n\u003ch4\u003eYamaha:\u003c\/h4\u003e\n\u003cdiv\u003e\u003cspan\u003eSMAX, TW200 Trailway, Morphous 250, V-Star 250, Virago 250, XV250, WR250, XT250, XMAX, YZF-R3, Majesty 400, SR400, 99-16 YZF-R6, YZF600, FZ-6, FZ-6R, Seca II XJ600S, XSR700, YZF750, YZFR7, FZ-07, MT-07, Tenere 700, FZ-8, TDM850, FZ-09, MT-09, FJ-09, XSR900, SR950, Bolt C Spec, YZF1000, 98-14 YZF-R1, FZR-1000, FZ-1, FZS1, GTS1000, 92-93 FJ1200, 03-12 FJR1300, MT-01, Super Tenere, 2009+ VMAX, Royal Star, (and more!)\u003c\/span\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eGeneral Compatibility Note:\u003c\/span\u003e\u003c\/strong\u003e  \u003cstrong\u003eAlthough we try to keep this Plug-And-Play list current and complete, there are many more bikes out there that are Plug-and-Play compatible\u003c\/strong\u003e, and hard wire compatible with our LED Flasher Relay.  We can not list them all!  If your motorcycle has a two wire flasher relay, our relay will work for certain but may need to be hard wired into the harness.  For three wire flasher relays, if one of the three wires is merely a ground wire, our relay will work but may need to be hard wired into the harness.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-P HARD WIRE INSTALLATION INSTRUCTIONS:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e You may lose your self-canceling feature by replacing the flasher relay if your bike is equipped from the factory with self-canceling turn signals.  If you want to keep this feature, use our \u003ca title=\"Universal Motorcycle Stage II Load Equalizer for Blinkers| Custom LED\" href=\"\/products\/stage-ii-load-equalizer\"\u003eStage II Load Equalizers\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eAll Applications:\u003c\/h4\u003e\n\u003cp\u003eIf your existing flasher relay is a two wire flasher relay (or a three wire with a ground wire), and you have access to it, you can replace it with our flasher relay.\u003c\/p\u003e\n\u003cp\u003eIdentify and connect the wires leading to the OEM flasher relay as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed wire on ELFR-P to power source (ignition switched +12v)\u003c\/li\u003e\n\u003cli\u003eWhite wire on ELFR-P to load (blinker lamps\/ blinker switch)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDucati:\u003c\/h4\u003e\n\u003cp\u003e996 - hard wire installation as follows when replacing OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle Light Blue (LB) gets connected to the ELFR-P Red wire\u003c\/li\u003e\n\u003cli\u003eMotorcycle Pink (P) gets connected to the ELFR-P White wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHonda:\u003c\/h4\u003e\n\u003cp\u003e2014 Grom hard wire installation as follows when replacing the OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Black to ELFR-P Red wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Gray to ELFR-P White wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUse crimp-on male \"quick disconnects\" to maintain factory plug.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e2003-2006 CBR 600RR hard wire installation as follows when replacing the OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle White\/Green stripe to ELFR-P Red wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Gray to ELFR-P White wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.5;\"\u003eRead informative \u003c\/span\u003e\u003ca style=\"line-height: 1.5;\" title=\"How to replace the Flasher Relay on 2003-2006 Honda CBR-600RR\" href=\"\/blogs\/custom-led-product-information\/12610269-cbr-600rr-flasher-relay-replacement-for-led-years-2003-2004-2005-2006\"\u003eCBR-600RR ELFR-1 installation article\u003c\/a\u003e\u003cspan style=\"line-height: 1.5;\"\u003e with video in our Blog\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003eCBR 125\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Brown wire to ELFR-P Red wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eMotorcycle Blue wire to ELFR-P White wire\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.5;\"\u003eUse optional male \"quick disconnects\" to maintain factory plug\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.5;\"\u003eSee similar picture of ELFR-1 installation \u003c\/span\u003e\u003ca style=\"line-height: 1.5;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/CBR125-Flasher-Relay.jpg?101\"\u003ehere\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKawasaki:\u003c\/h4\u003e\n\u003cp\u003e08-11 Ninja 250R hard wire installation as follows when replacing the OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle Orange\/Green stripe wire to the ELFR-P Red wire\u003c\/li\u003e\n\u003cli\u003eMotorcycle Orange wire to the ELFR-P White wire\u003c\/li\u003e\n\u003cli\u003eUse crimp-on male \"quick disconnects\" to maintain factory plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSuzuki:\u003c\/h4\u003e\n\u003cp\u003eAll late model GSXR's with two-wire replaceable flasher relays are also compatible, but require a hard-wire installation as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle Light Blue (LB) gets connected to the ELFR-P Red wire\u003c\/li\u003e\n\u003cli\u003eMotorcycle Orange\/ Green stripe gets connected to the ELFR-P White wire.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eYamaha:\u003c\/h4\u003e\n\u003cp\u003eRoadstar line (some models, \u0026lt; 2015), Raider, Warrior Stryker, V-Star - hard wire installation as follows when replacing OEM relay with our Electronic LED Flasher Relay:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorcycle Brown wire to ELFR-P Red wire\u003c\/li\u003e\n\u003cli\u003eMotorcycle Brown\/white stripe wire to ELFR-P White wire\u003c\/li\u003e\n\u003cli\u003eSee similar picture of ELFR-1 installation \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/Flasher-Relay-Roadstar.jpg?99\"\u003ehere\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse crimp-on male \"quick disconnects\" to maintain factory plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eIf you find that your motorcycles flasher relay is not two-wire and\/or replaceable, you may use the \u003ca title=\"Universal Motorcycle Load Equalizer for LED Blinkers and Turn Signals\" href=\"\/collections\/universal-led-load-equalizers\"\u003eCustom LED Universal Load Equalizers\u003c\/a\u003e along with your stock flasher relay instead.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eVideo\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eWe have a large collection of all Custom LED product videos on the \u003ca title=\"Custom LED's YouTube Channel with Product Reviews, Features, and more!\" href=\"https:\/\/www.youtube.com\/CustomLED\" target=\"_blank\"\u003eCustom LED YouTube Channel\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe videos in this playlist below are a collection of user-submitted and original videos related to our \u003ca href=\"https:\/\/www.customled.com\/collections\/electronic-led-flasher-relays\"\u003eLED Flasher Relays\u003c\/a\u003e.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/videoseries?list=PLrOpZb7iY08QeyQHXLRYiU-ENK0BI2xBV\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Custom LED ELFR-P Plug-And-Play Electronic LED Flasher Relay comes with detailed installation instructions.\u003c\/p\u003e\n\u003cp\u003eInstallation of this product requires that you identify and remove the OEM flasher relay motorcycle.  If you are unfamiliar with the location of your OEM flasher relay, or electronics in general, please consult a qualified technician or your repair manual for additional information.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of the ELFR-P is as follows:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca title=\"ELFR-P Programmable LED Flasher Relay for LED Blinkers Turn Signals by Custom LED\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/ELFR-P_Installation.pdf?98\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/reader_icon_special_8da8acb3-d5e5-4a69-b7cf-0d5fcde0f01b_small.jpg?2331\" alt=\"Installation Instructions\" align=\"middle\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"color: #999999; line-height: 1.5; text-align: center; font-size: small;\"\u003eClick icon to download. \u003cbr\u003eAdobe Acrobat Reader is required to view this file.\u003cbr\u003eIf you are having problems viewing the file, please download the free software \u003ca title=\"Download Adobe Reader\" href=\"https:\/\/get.adobe.com\/reader\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003csmall\u003eNOTE:\u003c\/small\u003e\u003c\/strong\u003e\u003csmall\u003e In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems.  These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps.  Problems such as, but not limited to: the \u003ca href=\"https:\/\/www.customled.com\/blogs\/custom-led-product-information\/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals\"\u003e4-way blink problem\u003c\/a\u003e (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in \"blinker mode\" due to non-zero blinker voltages.  Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle.  \u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eRemember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\u003cdiv\u003eproducts-recommended\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Custom LED","offers":[{"title":"Default Title","offer_id":570381181,"sku":"ELFR-P","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/products\/ELFR-P_3_max.jpg?v=1558406030"},{"product_id":"elfr-1-h-electronic-led-flasher-relay-4-pin-honda","title":"ELFR-1-H Electronic LED Flasher Relay 4-Pin Honda","description":"\u003cul\u003e\n\u003cli\u003eMaintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers.\u003c\/li\u003e\n\u003cli\u003ePlug and play connectivity with OEM connector (see compatibility list).\u003c\/li\u003e\n\u003cli\u003eRecommended accessory for Custom LED Integrated LED Tail Lights.\u003c\/li\u003e\n\u003cli\u003eNear zero initial turn-on delay (other LED relays delay when signals are first engaged).\u003c\/li\u003e\n\u003cli\u003e1-year \u003ca title=\"Custom LED's Warranty Policy\" href=\"\/pages\/custom-led-policies\"\u003eWarranty\u003c\/a\u003e \u0026amp; \u003ca title=\"Custom LED's Satisfaction Guarantee\" href=\"\/pages\/custom-led-policies\"\u003eSatisfaction Guarantee\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eShips same business day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"responsive-tabs\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNow you can finally fix the flash rate on your motorcycle with our unique Plug And Play solution\u003c\/strong\u003e!  That's right, our Electronic LED Flasher relay directly replaces the stock flasher relay on some Honda motorcycles by plugging directly into the harness in place of the OEM flasher relay!  See the compatibility list.  \u003c\/p\u003e\n\u003cp\u003eFor other motorcycles not on this compatibility list, please click \u003ca href=\"\/collections\/electronic-led-flasher-relays\" title=\"Motorcycle LED Flasher Relays\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis unit is guaranteed to operate at the normal DOT blink rate for compatible motorcycles with stock blinkers, LED blinkers, or any combination of both\u003c\/strong\u003e, provided the total load on the system is within 0.05A to 10A (0.6 Watts to 120 Watts!) - which basically covers the majority of  blinker products on the market!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the Installation Tab for more important details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e \u003cstrong\u003eYour motorcycle must have a rectified standard 12VDC system for this flasher relay to work (most bikes are 12VDC).\u003c\/strong\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum Rated Current: 0.05A\u003c\/li\u003e\n\u003cli\u003eMaximum Rated Current: 10A\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 12VDC\u003c\/li\u003e\n\u003cli\u003eFlash Rate: Constant\u003c\/li\u003e\n\u003cli\u003eSize: 1.2\" x 1.77\" x 0.74\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCompatibility List\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-1-H FLASHER RELAY PLUG-AND-PLAY COMPATIBILITY LIST:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cem\u003eNOTE: USA SPEC SHOWN, FOR NON-US SPEC VERIFY INDIVIDUALLY\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis list will determine if your motorcycle harness is known to be Plug-And-Play with our ELFR-1-H Flasher Relay!\u003c\/strong\u003e  If your bike is not on the list, it may or may not be plug-and-play.  Please visually compare the flasher relay connector on your motorcycle to confirm.  The compatibility list below is arranged by engine displacement.  If there is no year designation for your bike, that means it fits all years.\u003c\/p\u003e\n\u003cdiv class=\"gt-accordion\"\u003e\n\u003ch4\u003eHonda:\u003c\/h4\u003e\n\u003cdiv\u003e17-19 CMX300, 17-19 CMX500, 13-15 CB500F, 13-15 CB500X, 16-18 CBR500R, CB650F, CBR650F, NC700X, NSA700, CTX700X, VFR1200F, VFR1200FD, (and more!)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor other motorcycles not on this compatibility list, click \u003ca href=\"\/collections\/electronic-led-flasher-relays\" title=\"Motorcycle LED Flasher Relays\"\u003ehere\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eVideo\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eWe have a large collection of all Custom LED product videos on the \u003ca title=\"Custom LED's YouTube Channel with Product Reviews, Features, and more!\" href=\"https:\/\/www.youtube.com\/CustomLED\" target=\"_blank\"\u003eCustom LED YouTube Channel\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe videos in this playlist below are a collection of user-submitted and original videos related to our \u003ca href=\"https:\/\/www.customled.com\/collections\/electronic-led-flasher-relays\"\u003eLED Flasher Relays\u003c\/a\u003e.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/videoseries?list=PLrOpZb7iY08QeyQHXLRYiU-ENK0BI2xBV\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp\u003eThe Custom LED ELFR-1 Plug-And-Play Electronic LED Flasher Relay comes with detailed installation instructions.\u003c\/p\u003e\n\u003cp\u003eInstallation of this product requires that you identify and remove the OEM flasher relay on your motorcycle to install the ELFR-1-H in its place.  If you are unfamiliar with the location of your OEM flasher relay, or electronics in general, please consult a qualified technician or your repair manual for additional information.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of the ELFR-1-H is as follows:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca title=\"Custom LED ELFR-1-H Electronic LED Flasher Relay Installation Instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/INSTRUCTION_SHEET_WEB.pdf?v=1615492393\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/reader_icon_special_8da8acb3-d5e5-4a69-b7cf-0d5fcde0f01b_small.jpg?2331\" alt=\"ELFR-1-H Installation Instructions\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center; color: #999999; line-height: 1.5; font-size: small;\"\u003eClick icon to download. \u003cbr\u003eAdobe Acrobat Reader is required to view this file.\u003cbr\u003eIf you are having problems viewing the file, please download the free software \u003ca title=\"Download Adobe Reader\" href=\"https:\/\/get.adobe.com\/reader\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003csmall\u003eNOTE:\u003c\/small\u003e\u003c\/strong\u003e\u003csmall\u003e In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems.  These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps.  Problems such as, but not limited to: the \u003ca href=\"https:\/\/www.customled.com\/blogs\/custom-led-product-information\/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals\"\u003e4-way blink problem\u003c\/a\u003e (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in \"blinker mode\" due to non-zero blinker voltages.  Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle.  \u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eRemember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\u003cdiv\u003eproducts-recommended\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Custom LED","offers":[{"title":"Default Title","offer_id":27347597833,"sku":"ELFR-1-H","price":27.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/products\/ELFR-1-H-4.jpg?v=1673493728"},{"product_id":"elfr-1-u-electronic-led-flasher-relay-7-pin-suzuki","title":"ELFR-1-U Electronic LED Flasher Relay 7-Pin Suzuki","description":"\u003cul\u003e\n\u003cli\u003eMaintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers.\u003c\/li\u003e\n\u003cli\u003ePlug and play connectivity with OEM fitment (see compatibility list).\u003c\/li\u003e\n\u003cli\u003eRecommended accessory for Custom LED Integrated LED Tail Lights.\u003c\/li\u003e\n\u003cli\u003eNear zero initial turn-on delay (other LED relays delay when signals are first engaged).\u003c\/li\u003e\n\u003cli\u003e1-year \u003ca title=\"Custom LED's Warranty Policy\" href=\"\/pages\/custom-led-policies\"\u003eWarranty\u003c\/a\u003e \u0026amp; \u003ca title=\"Custom LED's Satisfaction Guarantee\" href=\"\/pages\/custom-led-policies\"\u003eSatisfaction Guarantee\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eShips same business day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"responsive-tabs\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNow you can finally fix the flash rate on your Suzuki motorcycle with our unique Plug And Play solution\u003c\/strong\u003e!  That's right, our Electronic LED Flasher relay directly replaces the stock combination relay on some Suzuki motorcycles by plugging directly into the harness in place of the OEM flasher relay!  All functions of the OEM combination relay are supported, with a normal blink rate for the flasher relay function.  See the compatibility list for details.  \u003c\/p\u003e\n\u003cp\u003eFor other motorcycles not on this compatibility list, please click \u003ca href=\"\/collections\/electronic-led-flasher-relays\" title=\"Motorcycle LED Flasher Relays\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis unit is guaranteed to operate at the normal DOT blink with stock blinkers, LED blinkers, or any combination of both\u003c\/strong\u003e, provided the total load on the system is within 0.05A to 10A (0.6 Watts to 120 Watts!) - which basically covers the majority of  blinker products on the market!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the Installation Tab for more important details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e \u003cstrong\u003eYour motorcycle must have a rectified standard 12VDC system for this flasher relay to work (most bikes are 12VDC).\u003c\/strong\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum Rated Current: 0.05A\u003c\/li\u003e\n\u003cli\u003eMaximum Rated Current: 10A\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 12VDC\u003c\/li\u003e\n\u003cli\u003eFlash Rate: Constant\u003c\/li\u003e\n\u003cli\u003eSize: 1.2\" x 1.77\" x 0.74\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCompatibility List\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eELFR-1-U FLASHER RELAY PLUG-AND-PLAY COMPATIBILITY LIST:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cem\u003eNOTE: USA SPEC SHOWN, FOR NON-US SPEC VERIFY INDIVIDUALLY\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis list will determine if your motorcycle harness is known to be Plug-And-Play with our ELFR-1-U Flasher Relay!\u003c\/strong\u003e  If your bike is not on the list, it may or may not be plug-and-play.  Please visually compare the flasher relay connector on your motorcycle to confirm before ordering.  The compatibility list is arranged by engine displacement.  If there is no year designation for your bike, that means it fits all years.\u003c\/p\u003e\n\u003cdiv class=\"gt-accordion\"\u003e\n\u003ch4\u003eSuzuki:\u003c\/h4\u003e\n\u003cdiv\u003eMarauder GZ250, TU250X, DR-Z400S, DR-Z400SM, Burgman 400 (AN400\/ALL), Burgman 650 (AN650\/A), 01+ GSX-R600, GSX-R600W, GSX-R600X, \u003cspan\u003eGSX-R600Y, \u003c\/span\u003e00-03 Bandit (GSF600S), 98+ Katana 600 (GSX600F), 99-16 SV650, 99-16 SV650S, Katana 650 (GSX650F), 04-16 V-Strom 650 (DL650\/A), GSX-S750, 00+ GSX-R750, GSX-R750X, 98+ Katana 750 (GSX750F\/ALL), Marauder VZ800, Boulevard M50 (VZ800\/Z), Boulevard C50 (VL800\/C), 01-16 GSX-R1000, 02-13 V-Strom 1000 (DL1000), 01-05 Bandit (GSF1200\/S), 01-03 Bandit Naked (GSF1250SA), 07-09 Bandit (GSF1250SA), 08 B-King (GSX1300BK\/A), Hayabusa (GSX1300R), VL 1500 Intruder LC, Boulevard M90 (VZ1500), Boulevard C90\/ALL (VL1500\/ALL), Boulevard M109R (VZR1800\/ALL), Boulevard C109R (VLR1800), (and more!)\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor other motorcycles not on this compatibility list, click \u003ca href=\"\/collections\/electronic-led-flasher-relays\" title=\"Motorcycle LED Flasher Relays\"\u003ehere\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eVideo\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eWe have a large collection of all Custom LED product videos on the \u003ca title=\"Custom LED's YouTube Channel with Product Reviews, Features, and more!\" href=\"https:\/\/www.youtube.com\/CustomLED\" target=\"_blank\"\u003eCustom LED YouTube Channel\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe videos in this playlist below are a collection of user-submitted and original videos related to our \u003ca href=\"https:\/\/www.customled.com\/collections\/electronic-led-flasher-relays\"\u003eLED Flasher Relays\u003c\/a\u003e.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/videoseries?list=PLrOpZb7iY08QeyQHXLRYiU-ENK0BI2xBV\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp\u003eThe Custom LED ELFR-1 Plug-And-Play Electronic LED Flasher Relay comes with detailed installation instructions.\u003c\/p\u003e\n\u003cp\u003eInstallation of this product requires that you identify and remove the OEM flasher relay motorcycle.  If you are unfamiliar with the location of your OEM flasher relay, or electronics in general, please consult a qualified technician or your repair manual for additional information.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of the ELFR-1-U is as follows:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/INSTRUCTION_SHEET_WEB.pdf?v=1615492393\" title=\"Custom LED ELFR-1-U Electronic LED Flasher Relay Installation Instructions\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/files\/reader_icon_special_8da8acb3-d5e5-4a69-b7cf-0d5fcde0f01b_small.jpg?2331\" alt=\"ELFR-1-U Installation Instructions\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center; color: #999999; line-height: 1.5; font-size: small;\"\u003eClick icon to download. \u003cbr\u003eAdobe Acrobat Reader is required to view this file.\u003cbr\u003eIf you are having problems viewing the file, please download the free software \u003ca title=\"Download Adobe Reader\" href=\"https:\/\/get.adobe.com\/reader\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003csmall\u003eNOTE:\u003c\/small\u003e\u003c\/strong\u003e\u003csmall\u003e In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems.  These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps.  Problems such as, but not limited to: the \u003ca href=\"https:\/\/www.customled.com\/blogs\/custom-led-product-information\/4-way-hazard-blink-problem-on-motorcycles-with-led-turn-signals\"\u003e4-way blink problem\u003c\/a\u003e (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in \"blinker mode\" due to non-zero blinker voltages.  Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle.  \u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eRemember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\u003cdiv\u003eproducts-recommended\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Custom LED","offers":[{"title":"Default Title","offer_id":19622147457122,"sku":"ELFR-1-U","price":27.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0190\/4226\/products\/ELFR-1-U-5.jpg?v=1558405995"}],"url":"https:\/\/uk.customled.com\/collections\/electronic-led-flasher-relays\/model-zx1200.oembed","provider":"Custom LED","version":"1.0","type":"link"}